Glazed Fire Resistant Door

Glazed Fire Resistant Door Specification

Application
Industrial

Type
Door

Material
Glass

Door Type
Other

Surface Finishing
Powder Coated

Size
84 Inch

Color
Transparent

Thickness
1.6 Millimeter (mm)

Design
Plain

Glazed Fire Resistant Door Trade Information

Minimum Order Quantity
10 Square Meters

FOB Port
Delhi

Supply Ability
2000 Square Meters Per Month

Delivery Time
15 Days

Sample Available
No

Sample Policy
Free samples available with shipping and taxes paid by the buyer

Packaging Details
Packing with Corrugated paper

Main Export Market(s)
North America, Asia, Australia, Central America, South America, Eastern Europe, Western Europe, Middle East, Africa

Main Domestic Market
All India

Certifications
ire rating and tested in accordance with IS 3614-2021 & BS 476 Part 22 as per prototype tested earlier at Govt Lab Department of Industry Commerce (DIC)/GQMC Haryana laboratory

About Glazed Fire Resistant Door

Providing of 4C Fire Protection make fire resistant door frame of section 60x 60 mm on horizontal side & vertical sides having built in rebate made out of 1.6 mm thick GI sheet ( Zinc coating not less than 120gm/m) suitable for mounting 120 min Fire Rated Glazed Door Shutters. The frame shall be filled with Mineral wool Insulation having density min 96Kg/m . The frame will have a provision of G.I. Anchor fasteners 14 nos ( 5 each on vertical style & 4 on horizontal style of size M10 x 80 ) suitable for fixing in the opening along with Factory made Template for SS Ball Bearing Hinges of Size 100x89x3mm for fixing of fire rated glazed shutter . The frame shall be finished with a approved fire resistant primer or Powder coating of not less than 30 micron in desired shade as per the directions of Engineer - in- charge . (Cost of SS ball bearing hinges is excluded). Providing of 60 mm thick 4C Fire Protection make glazed fire resistant door shutters of 120 min Fire Rating confirming tofire rated doors as per BS:476 Part- 20 & 22 & IS 3614 -2021tested at at Govt Lab Departtment of Industry Commerce Haryana (DIC) with suitable mounting on door frame, consisting of vertical styles, top rail & side rail 60 mm x 85 mm wide and bottom rail of 110 mm x 60 mm made out of 1.6mm thick G.I. sheet (zinc coating not less than 120gm/m) duly filled mineral wool insulation having density min 96 kg/m and fixing with necessary stainless steel ball bearing hinges of size 100x89x3mm of approved make, including applying a coat of approved fire resistant primer or powder coating not less than 30 micron etc all complete as per direction of Engineer-in-charge (paneling to be paid for separately). Providing of Pyroguard/Schott make Glass glazing in fire resistant door shutters, fixed panels & partitions etc., with G.I. beading made out of 1.6 mm thick G.I. sheet (zinc coating not less than 120 gm/m) of size 20 x 33 mm screwed with M4 x 38 mm SS screws at distance 75 mm from the edges and 150 mm c/c , including applying a coat of approved fire resistant primer/powder coating of not less than 30 micron on G.I. beading, & special ceramic tape of 5 x 20 mm size etc complete in all respect as per direction of Engineer-in-charge. The glass should be clear, toughened, interlayered, non-wired fire resistant having minimum 11 mm thickness of approved brand with 120 minutes of fire resistance both integrity & radiation control (EW120) and minimum 20 min of insulation (EI20) and having a sound reduction of 37dB and LT of 86%. Glass shall be compliant to class 2(B)2 category of Impact Resistance as per EN 12600. The maximum glazing size cannot be more than 1100 mm x 2200 mm (w x h) or 2.42 sq mts in total area. The test report for the complete system (Glazed Door or Partition) will be considered valid only if it contains the stamp and signature of the authorized signatory from the glass manufacturer. (Actual glass size is to be measured at site for payments).